Stainless Steel Dehydrator Model D-14 - The TSM Commercial Dehydrators have, for years, been an industry favorite. To better accommodate your drying needs, we are pleased to introduce our D-14 Stainless Steel Dehydrator, our now largest and most powerful dehydration machine!
We've taken everything you love about our smaller models and made this unit even better! We made the D-14 Dehydrator larger to allow for two extra shelves, increasing your drying space by nearly 20%! You will be able to dry as much as 21 lbs. of meat for jerky at a time. Our new LED Display will allow you to set the unit for an unprecedented 99 hours of drying. The D-14 Dehydrator is even easier to clean than our other units. We've designed a stainless steel removable rack system, allowing for both the 14 shelves and their brackets to come out for cleaning. Similarly, the entire back panel is removable for cleaning.
The D-14 Dehydrator is by no means lacking in efficiency. The louvers on the door facilitate water removal, and the vertical location of the 2 rear mounted fans improve air circulation throughout the entire machine.
With all of the improvements, the D-14 still maintains the quality and dependability of a Sausage Maker product. Its Stainless Steel construction won't rust or tarnish, and the unit is backed by our guarantee. We're sure you'll be as excited about our D-14 Dehydrator as we are!
The D-14 Stainless Steel Dehydrator features a solid state control system has a 99 hour timer and temperature probe that allows you to monitor dryer state without opening, keeping heat inside. Temperature setting can be changed during drying session without resetting timer. The D-14 commercial dehydrator will achieve a temperature of 150° F in 3 hours or less for fast, efficient jerky drying. Air flows from back to front. You get over 36 square feet of drying area on large rectangular wire dehydrating racks. Fully electric operation. Smooth electronic control panel wipes clean with damp cloth. Dehydrator's internal temperature range is 84° to 200°, is adjustable in 5° increments and is maintained to +/- 2° of the setting.
Construction Materials: The D-14 dehydrator has a stainless steel cabinet and is available in your choice of two rack materials: Chromed steel with 3/4" holes between wires; or, stainless steel with 3/8" holes.
The spacing between the racks is 1.25". The racks are removable allowing you to create a larger cavity between racks for drying bulkier materials.
TSM D-14 Commercial Dehydrator Specifications:
- 220V
- Two 800 watt heating elements (1600W total)
- Dual 7" rear-mounted fans for strong air flow
- LED display that includes: Temp setting 84°F-200°F, timer, and actual temperature
- 17 hour timer
- 15-18 lb. jerky capacity
- 3-4 hour start to finish for jerky
- 14 wire racks each 20.75” x 18” (2.6 sq. ft. per rack)
- Space between racks: 1.25"
- Space between wires within rack (choose 3/4" or 3/8" from models listed below.)
- Outside dimensions: 21.5”W × 22.25"D x 30.3"H (with legs)
- Weight: 60-72 lbs, depending on type of racks installed
The D-14 Stainless Steel Commercial Dehydrator is made in the USA and comes with a 1 full year manufacturer's warranty for commercial or home use.
Choice of 2 types of shelves:
Chrome Plated Shelves w/ 3/4" holes
Stainless Steel Shelves w/ 3/8" holes
Note: The mfg. has not submitted the D-14 Commercial Dehydrator for NSF inspection. Many customers are using the stainless steel D-14 Dehydrator to make jerky and other dried foods for sale, but regulations governing commercial food equipment specifications vary widely between localities so producers must confirm suitability before ordering.
