Sprouting seeds produce heat during the germination stage and should be cooled to reduce mold and rotting. The EasyGreen™ Sprouter features a patented technology that applies water-mist and oxygen to the seeds which cools and oxygenates the seeds and provides essential water. Sprouts require little water but abundant amounts of oxygen. Other automated sprouters and conventional sprouting methods supply water but only provide natural air displacement.
Inhibitors in seeds are the natural defense mechanism of seeds acting as a deterrent for germs and bugs. Some sprouters re-circulate the same water! Your sprouts are then irrigated with water containing toxins and inhibitors, defeating the concept of using clean, good water for your sprouts. Bearing in mind that sprouts are made of 80% water, using clean water makes sense. The EasyGreen™ drains all used water out of the machine.
Sprouts are sensitive to environmental conditions and climate changes. For example, in warm, humid areas such as Florida, Hawaii, Brazil, it’s virtually impossible to sprout with conventional methods. The EasyGreen™ Sprouter works in all these areas year around! To the full satisfaction of our customers.
Managing and controlling the humidity within the machine is critical to the sturdiness of the sprouts. The EasyGreen™ Sprouter uses a unique 96-activations timer, allowing the grower to fine-tune the machine to his or her specific environmental conditions.
Unlike the EasyGreen™ Sprouter, other automatic sprouters do not have a built-in water reservoir and cannot select the source of water to use. The EasyGreen’s built-in water reservoir is compatible with either de-mineralized water, distilled or R.O. according to your specific needs.
The water reservoir allows adding minerals that enhances growth, such as liquid kelp or hydroponic growing solutions. No known conventional or automatic system allows the same flexibility.
The built-in water reservoir allows the grower to add solutions that assist in disinfecting the crops, such as hydrogen peroxide.
The EasyGreen™ unit uses about ½ gallon of water in 24 hours due to it's fine misting activity. Sprouters that use an automatic irrigation system need to be plumbed and use 3.5 to 5 gallons of water a day!
Seeds germinated in conventional sprouting methods such as jars, bags, trays etc. need to be MANUALLY rinsed 3 to 6 times a day. The EasyGreen™ Sprouter rinses automatically as many times as needed a day during the complete growing cycle.
Conventional sprouters require a pre-soaking operation of 8 hours up to 24 hours, before commencing the propagation of the seed. The EasyGreen™ Sprouter requires NO pre-soaking. Seeds are placed in the tray or cartridge DRY and the machine takes over, soaking, rinsing, misting, oxygenating and draining automatically. Thus saving you an extra day of pre-soaking and the manual handling of the repeat daily rinsing.
The misting and oxygenating automatic cycles assures quickest harvest. 15% to 40% quicker then any sprouting method.
Unlike other automatic sprouters, the EasyGreen™ uses a mist generator. No sprinkles or foggers that will clog and may stop irrigating without the grower being aware.
Some growers prefer to use soil for some crops such as wheatgrass or sunflower greens. Other sprouting methods are soil or soil-less (Hydroponic). The EasyGreen™ may use both concepts! With no damage to the machine or crops.
The EasyGreen™ sprouter uses FOOD GRADE QUALITY Trays and Cartridges in accordance with FDA regulations. Most other sprouters use storage containers and trays!
D.I.Y. sprouters require purchasing parts at hardware stores, not to mention the hassle of putting them together, which means there can be no manufacturer’s warranty on the complete system! The EasyGreen™ revolutionary system, now sold in 32 countries around the world, carries a full manufacturer’s warranty. We are so confident in our technology that you may purchase an extended manufacturer's warranty for up to 10 years!
